Delta-controls DPT-2000 Uživatelský manuál stáhnout pdf (Strana 14)

12 IOM-DPT-A: FEB 2014

4.1.1. The DPT-2000ALW transmitters in intrinsically safe version have additional designations, which

are specified in DTR.DPT.ALW.03 Appendix Exi.

4.1.2. The DPT-2000ALW transmitters in Exd version have additional designations, which are specified

in DTR.DPT.ALW.03 Appendix Exd.01.

4.2. Ordering procedure

Procedure of ordering

Example: Temperature transmitter DPT-2000ALW, shield T1, version Exi, mounting length 250 mm,

connection flange DN50 PN40, nominal range: -40 do 550 °C, calibrated range: 0 do 300 °C,

alarm signal for example 23 mA.

DPT-2000ALW / T1 / Exi / L=250 mm / DN50 Pn40 / - 40 ÷ 550 °C / 0 ÷ 300 °C / 23 mA.

5. TECHNICAL DATA

5.1. Electrical parameters

Power supply for normal version 12 * ÷ 55V DC

Power supply for intrinsic-safe versions - in

accordance with „Appendix Exi”

Power supply for Exd versions - in accordance with

„Appendix Exd.01”

Output signal 4÷20mA + Hart Rev.5.1

Communication realised via a 4÷20mA signal and Hart transmission

using KAP-03 communicator or SH05 Delta Controls

modem or PC computer with DPT2000 software

Resistance for communication (Hart) 250÷1100, min 240Ω

Load resistance Ro[] =

Load resistance for intrinsic-safe versions – in accordance with „Appendix Exi”

)

15 V for transmitters with display backlight.

Usup[V]-12V *

0,023A

Special version: Exi, Exd, IP-67, another

kołnierza

Set (calibrated) range

Type of shield

Mounting length

Connection thread: M20x1,5, G1/2”, M27x2, G1” or flange type

Nominal range

Alarm signal

DPT-2000ALW/___/___/L=.…mm/___/___÷___°C/___÷___C/___

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Žádné komentáře

Delta-controls DPT-2000 Uživatelský manuál Strana 14